Page 6 of 22 Rev: 9/30/2011 1:26 PM
Thermostat Energy Button Operation
The Energy button is designed to be a very quick to use option that saves energy (and money). When
you press it, it will back off the set point by a specified value. The default value is 5 degrees from the
current setting. To change the default offset value away from 5 degrees, you must use HouseLinc.
When you exit Energy mode, it will change back the 5 degrees that were change upon entry
The unit remains in Energy mode until:
Energy button is pressed again
The mode button is pressed
A pre-programmed mode is activated due to time
Up / Down adjust the temperature set point based on the mode you are currently in inside Energy.
No options blink with this button’s operations.
From Off Mode:
Energy button does nothing because the
system is off (at maximum energy savings
already)
From Auto Mode:
Both Heat and cool set points back off as
specified
Default back-off is 5 degrees
From Cool Mode:
Cool set point backs off as specified
Default back-off is 5 degrees
From Heat Mode:
Heat set point backs off as specified
Default back-off is 5 degrees
When you go into Energy mode, Up and Down buttons are active and the previous pre-programmed
mode (Wake, Leave…) will continue to show.