Page 9 of 15 : 11/20/2012 4:14 PM
Remove Mini Remote as a Controller of Multiple Responders
1) Tap the Mini Remote paddle (top or bottom) – if in 2 scene mode, tap the top of the paddle for scene
1 or the bottom for scene 2
2) Press and hold set button for 3 seconds - until you hear a beep
LED will begin blinking green
3) Press and hold set button a 2
nd
time for 3 seconds - until you hear a beep
LED will begin blinking red
4) Tap set button
LED will begin double-blinking red
5) For each responder you wish to remove, press and hold its set button until Mini Remote double-
beeps
LED will continue double-blinking red
6) When all your devices have been removed, tap Mini Remote’s set button
Mini Remote will double-beep and its LED will turn off
Change Paddle / Scene Configuration (e.g. Change to 2 Scene Mode)
1. Press and hold set button until it beeps
LED will begin blinking green
2. Press and hold set button until it beeps again
LED will begin blinking red
3. Press and hold set button until it beeps a third time
LED will begin blinking green
4. Press and hold set button until it beeps a fourth time
LED will begin blinking red
5. Tap set button
LED will begin double-blinking red
6. Press the appropriate paddle for the desired button/scene configuration
Desired Configuration
Paddle to Press
2 scene Toggle
Bottom
2 scene Non-Toggle (Always On)
Bottom twice
1 scene (Default)
Top
Mini Remote will double-beep and its LED will turn off
7. To confirm the configuration, tap the bottom of the paddle several times
Mini Remote’s LED will flash as follows
Flash Pattern
Configuration
