Page 11 of 16
2453-222/2453-422/2453-522 - Rev: 1/21/2014 7:51 AM
Load brightness levels
32 locally (256 with software)
LED
Green when load is on, red when load is off.
Blinks red when responder does not acknowledge (can be disabled via
software).
Blinks red or green during setup.
LED brightness
Adjustable, from off to bright
Local control
Yes
Commands supported as controller
On/off, Fast on/off, Begin brighten/dim, End brighten/dim
Commands supported as responder
On/off, Fast on/off, Beep
Software configurable
Yes
RF range
Up to 150 feet (50 meters) open air*
*Range may vary due to local interference
Phase detect beacon
Yes
INSTEON device category
0x02 Switched Lighting Control (all frequencies)
INSTEON device subcategory
US
0x2E
EU
0x33
AUS/NZ
0x34
X10
X10 address
1 optional (comes unassigned)
X10 transmitter
Yes
X10 receiver
Yes
X10 status response
Supported
X10 resume dim
Supported (by setting local on-level to zero)
X10 minimum transmit level
3.2 Vpp into 5 Ohms
X10 minimum receive level
20mV into 5 Ohms
X10 messages repeated
No
Mechanical
Mounting
35mm (top hat) DIN Rail
Wires
NA
Max Cable Size
4mm2, 12 AWG (2.72mm Diameter)
Min Cable Size
1.5mm2, 15 AWG
Screw DIN Rail connections
Line, Neutral, Load, Sense 1, Sense 2
Case color
White
Set button
Yes
Plastic
UV stabilized polycarbonate
Beeper
Yes
Beep on button press
Optional (off by default)
LED
1, RGB
Dimensions
3.14"H x 2.05"W x 2.48"D (80mm x 52mm x 63mm)