background image

                                                                 Page 8 of 27                                            Rev: 4/19/2013 10:47 AM 

 

 

 

 
 

Third press of Time/Sensor:

 

Clock Format setting (12- or 24-Hour clock)

 

 

Entire time line blinks 

 

Up/Down arrows cycle between 12- and 24-hour clock format 

Note: AM/PM is not displayed when in 24-hour format. 

 

 

Program Button Operation

  

 

The Program button allows you to set up the various preprogrammed modes (Wake, Leave, Return 
and Sleep). 

 

Go to the next step by pressing Program again. 

 

Exit Program setup by: 

Letting it time out after 4 minutes. 

Pressing Mode button 

 

IMPORTANT!

 Once you have added INSTEON Wireless Thermostat to a scene in INSTEON Thermostat 

as a wireless temperature zone, the Program button will no longer function. All program controls will be 
performed on the INSTEON Thermostat. 
 

Note: Text colors below indicate element that is presently blinking during setting procedure

 
First press of Program:  
Selects from available pre-program modes 

Up/Down arrows cycle through Wake, Leave, Return and Sleep. 

NOTE:

 

 

Energy is not a part of this option 

 

Once a preprogrammed mode is selected, that item remains displayed throughout to 

 indicate the mode you are programming 

 

The current mode settings are displayed on the thermostat at each setup step

 

 

 

Second press of Program:  
Start Time

  

 

Up/Down arrows cycle through time in 15-minute increments. 

Note: when pressing the Down arrow, if 

you come within 15 minutes of another preprogrammed mode time, you will not be able to increase 
the time any further.

 

 

Pressing and holding Up/Down arrows cycles through faster 

Note: AM/PM changes automatically as needed.

 

Summary of Contents for 2441ZTH




























Reviews: