Instar IN-6012 HD, User Manual

Page: 24 / 38

/21
5.5.6 ALARM/FTP
To use the video FTP upload (s.
5.5.1
) you first have to
set your ftp server address and login credentials. E.g.
you can use your routers FTP service as
FTP Server
- in this case simply put in your routers IP as the FTP
Server address. If you set up a FTP server on a local PC
(for example with Filezilla Server ), use the PC’s local
IP address. Of course you can use webservers URL’s as
well. The standard FTP port is 21.
You can define an upload directory for your camera under
FTP Folder
. The root folder
of the FTP server can be reached by “./”. The separator for the folders is the forward slash.
A subfolder (e.g. INSTAR) can be reached by “./INSTAR”. An ending forward slash is not
obligatory, but can be used.
The FTP Username and FTP Password are the login credentials for your FTP Account.
For the FTP Mode you can choose between a passive (PASV) and an active mode
(PORT). The standard is the active PORT mode. If your server is installed behind a
router with an active network address translation (NAT), or if a firewall is blocking the
servers network from an external access by your camera, you should choose the PASV
mode.
The name of the video file is fixed and correspond to the following syntax: rec011_
YYYYMMDDhhmmss.asf. The first part show the channel 11 for recording. Separated
by an underscore it shows the timestamp, which marks the time of the motion detection.
Please refer to our website for information on how to set up a FTP server.
5.5.7 ALARM/PHOTOS ON SD
Here you can activate the recording of a snapshot se-
ries in a selectable time interval. The snapshots will be
saved to SD card which has to be in the camera’s SDHC
slot (a 1 GB SD card is included in the delivery). The
JPG snapshot can later be accessed via the web userin-
terface (s.
5.6.1
). The file will be named according to
the following: IMG_TM_YYYYMMDDhhmmss_000.
jpg.