Instar IN-6012 HD, User Manual

Page: 21 / 38

/18
5.5 ALARM
l
5.4.3 MULTIMEDIA/IMAGE
Here you can adjust the image parameters brightness,
saturation, contrast, exposure (shutter) and sharpness.
You can flip and mirror the video image, can display a
timestamp and set a camera name and display it as well.
The displayed parameters are burnt into the camera im-
age. Please make sure to restart the camera after chang-
ing the name.
5.5.1 ALARM/AREAS
Your camera detects motion by a picture analysis that is sensitive to every change inside
the video frame instead of employing an infrared or microwave sensor. In “Areas” you
can adjust up to 4 detection areas in size and sensitivity for trigger event. Once the mo-
tion detection in an area is activated, its sensitivity can be adjusted from very insensitive
(value=0) to very sensitive (value=100).
The MJPEG mode of the camera allows you to access the videostream with your browser
without
the need of
additional browser-plugins
! You can use the MJPEG mode when
you are accessing the camera from a system that doesn’t allow you to install the ActiveX
control element or the QuickTime plugin for Firefox, Chrome or Safari. Please consider
that this mode is only for viewing the live image of your camera. Even with only one user
logged in your cameras framerate might drop below
4 fps
because of the high bandwidth
requirements!