User Manual IN-2901 - Page 14
2.2.3. First Setup without “IP Camera Tool”
If you already have set your camera before with the “IP Camera Tool” you can ignore this
settings.
The exactly steps can vary according to your operating system so we will just describe
the steps in general. Requirements is a DHCP-Server in your network (mostly a router),
because the camera comes with the preset setting “IP-address automatically by DHCP”.
1. Connect the camera as already described in
2.1. Installation on page 9
.
2. Find out the IP address of the camera. You can use a simple IP scanner for this.
You may download a small IP scanner on our website:
http://www.instar.de/
3. Open the graphical interface of your camera by entering the IP address in your
web browser. (Username: admin, without Password), to start the configuration of
your IP camera.
