7
Getting Started |
3
Remove and Install Float Valve
The float valve has 2 positions. It
pops up
to
indicate when the cooker is pressurised and
lowers
into the lid
when the cooker is
depressurised
.
Remove:
Place one finger on the flat
top
of the
float valve. Turn lid over. Detach silicone cap
from the
bottom
side of the float valve. Remove
float valve from
top
of lid. Do not discard float
valve or silicone cap.
The float valve and silicone cap must be installed
before use to seal in pressurised steam.
Install:
Drop float valve into float valve hole on
top
of lid. Place one finger on the flat top of float
valve. Turn lid over. Attach silicone cap to
bottom
of float valve. Refer to “Venting Methods” in this
guide for information on releasing pressure.
WARNING
While float valve is
up
, contents of cooker are pressurised.
Do not attempt to remove lid
. Refer to “Venting Methods” section in
this guide for information on releasing pressure. Failure to comply with this instruction could cause injuries or property damage.
Pressurised
Top
Depressurised
Bottom
