6 | Getting Started
2
Check Sealing Ring and Sealing Ring Rack
Remove:
Pull sealing ring out from behind sealing ring rack.
Inspect sealing ring rack. It should be centred in the lid and an even
height all the way around.
Sealing ring must be installed before use and cleaned after each use.
Install:
Place sealing ring over sealing ring rack and press into place.
Ensure
entire
sealing ring is snug behind sealing ring rack.
After closing the lid, the sealing ring creates an airtight seal between lid
and cooker base. The sealing ring is an integral part of product safety.
Only one sealing ring should be installed when using your cooker. Replace your sealing ring every
12-18 months or when deformation or damage is noticed.
CAUTION
Always check for cuts or deformations in sealing ring prior to cooking. Only use authorised Instant Pot
®
sealing rings. Failure to follow these instructions may cause food to discharge, which may lead to personal
injury or property damage.
Remove
Install
To check or clean the parts in
Steps 2-7, please make sure
the unit is unplugged and cool
before performing any of
these tasks.
CAUTION
Sealing rings may stretch over time. Do not use a stretched or damaged sealing ring. If puckering occurs,
replace sealing ring.
