8
Get started
9
Get started
INITIAL SET UP
Clean before use
1.
Wash the inner cooking pot with hot water and soap. Rinse and use
a soft cloth to dry the outside. Or you can wash the inner cooking
pot in the dishwasher
2.
Wipe the heating element inside the cooker base with a soft cloth
to ensure there are no stray packaging particles.
3.
Wash the accessories with hot water and dish soap. Rinse with
warm, clear water and use a soft cloth to dry.
Setting up the condensation collector
The condensation collector sits at the back of the cooker base and
accumulates overflow moisture from the condensation rim. It should be
installed before cooking, then emptied and rinsed out after each use.
Remove the condensation collector
Pull the condensation collector away from the cooker base; do not
pull down.
Note the tabs on the cooker base and the grooves on the condensation collector.
Install the condensation collector
Align the grooves on the condensation collector with the tabs on
the back of the cooker base and slide the condensation collector
into place.
3.
Press
Delay Start
again to toggle to the minutes field and adjust
the delay time minutes.
4.
4 Delay Start begins automatically and the timer counts down.
5.
5 When Delay Start ends, the Smart Program begins, and the
display indicates
On
.
Save Custom Temperatures
You can set and save custom temperatures for the Sous Vide, Air Fry,
Roast, Bake, Broil and Dehydrate Smart Programs.
1.
Select the Smart Program you want to set.
2.
Use the
Temp – / +
buttons to adjust the temperature in °F or °C.
3.
Press
Start
to start the program and save the temperature.
The next
time you use that Smart Program, the new temperature is used. Adjustments made after
cooking begins are not saved.
Reset Smart Programs to original settings
Reset Individual Smart Programs
1.
With the cooker in Standby mode, press and hold one Smart Program
button until the cooker returns to Standby and shows
OFF
.
The Smart Program’s pressure level, cooking time and temperature are restored to the factory
default setting.
Reset All Smart Programs
2.
With the cooker in Standby mode, press and hold
Cancel
until the
cooker beeps.
All Smart Program pressure levels, cooking times and temperatures are restored to the
factory default setting.
