Insta 907, Operation And Maintenance Manual

Page: 8 / 22

FOR USE BY QUALIFIED PERSONNEL ONLY
NOTE
When in the normal mode, none of
the five program LED's will be
blinking and the user cannot change
the time and temperature for any of
the five presets.
NOTE
When the machine is operating with
none of the five program LED’s lit, i.e.
no presets, the time and temperature
WILL BE SAVED even if the power is
turned off. The presets will also be
saved when the power is turned off.
7. Push and hold both the MODE and PGM
buttons for 3-5 seconds until a single beep
is heard to exit the
programming mode.
7
Timer
• The controller has a count down timer, which
automatically disengages (opens) the machine
at the completion of the application.
• Timer display is minutes:seconds. Range is
00:00 to 10:00 , Colons (:) flash while timer is
running.
Counter
The controller has a built in cycle counter.
• Press MODE button until the counter is
displayed.
• Counter display range is 0000 to 9999.
• To reset the cycle counter, display the counter
reading, then push and hold UP (
↑
) and DOWN
(
↓
) arrow buttons for 3 seconds until the counter
resets to zero (0000) on the display.
NOTE
The DISENGAGE switch (located in
the center of the instrument panel)
may be pushed at any time to
deactivate the machine. The cycle
will stop immediately, and the timer
will reset.
Additional Notes