Insta 718, Operation And Maintenance Manual

Page: 8 / 22

FOR USE BY QUALIFIED PERSONNEL ONLY
Sleep Time
Sleep Time, Set Back
1. Press the POWER/MODE (or MODE )
button until the counter displays. Enter
the Factory Mode by pressing and
holding together
SET then
POWER/MODE (or MODE ) for 3 to 5
seconds .
p ,
Temperature, Automatic Shut Off,
Temperature Conversion, and
Offset
Model 718 Shown
2. Press SET + UP or DOWN Arrow to set
Sleep Mode Time.
+
The Sleep Mode / Automatic Shut Off is designed
to save electrical consumption when the user is
not engaged in the usage of the Insta heat seal
machines for a pre-determined period of time
defined by the user.
Sleep Mode Time.
1._XX ; XX = Minutes from OFF to 99
+
or
defined by the user.
During activation, any disturbances such as the
key press or heat press cycle will reset the timers
for both Sleep Mode and Automatic Shut Off.
When the Automatic Shut Off is set to OFF and
the Sleep Mode is activated any disturbances to
Set Back Temperature
3. Press POWER/MODE (or MODE ).
the Sleep Mode is activated, any disturbances to
the machine will disengage the Sleep Mode.
When the Sleep Mode is set to OFF, the timer for
Automatic Shut Off will activate and resets after
every pressed key or heat press cycle.
4. Press SET + UP or DOWN Arrow to set
Set Back Temperature.
+
or
• Sleep Time
(Level 1 – Menu 1)
• Set Back Temperature
(Level 1 – Menu 2)
• Automatic Shut Off Time
(Level 1 – Menu 3)
• Fahrenheit / Celsius
2._XXX ; XXX = Temp. from 225F to
300F
Fahrenheit / Celsius
(Level 1 – Menu 4)
• User Offset
(Level 1 – Menu 5)
7