background image

If The Product is not covered by this warranty, you will be charged for the shipping of 
The Product back to you and charged for any service and/or replacement parts/products 

The Product back to you and charged for any service and/or replacement parts/products 
at Insta’s then current published rates. 

 

What happens when Insta elects to replace your Machine? 
When a replacement Machine is authorized by Insta, Insta will send a replacement 
Machine and issue a Return Authorization for the return of the Product.  The Purchaser 
will be charged for the new machine at the time of the shipment.  Once the machine is
returned and the warranty confirmed, The Purchaser will receive a credit/refund.  The 
replacement machine you receive (will be covered by the balance of the limited
warranty period remaining on the original product, plus an additional thirty (30) days.
You will keep the replacement machine that is sent to you and your original machine 
shall become the property of Insta. 
THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, WRITTEN OR
ORAL WHETHER EXPRESSED BY AFFIRMATION PROMISE DESCRIPTION

ORAL,  WHETHER  EXPRESSED  BY  AFFIRMATION,  PROMISE,  DESCRIPTION,
DRAWING, MODEL OR SAMPLE.  ANY AND ALL WARRANTIES OTHER THAN THIS 
ONE, WHETHER EXPRESSED OR IMPLIED INCLUDING IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
DISCLAIMED.  INSTA SHALL HAVE NO LIABILITY FOR DEFECTS OF ANY NATURE
WHATSOEVER EXCEPT AS PROVIDED FOR HEREIN. 

 

This Limited Warranty (and Insta’s obligation to you) may not be changed in any way
unless you and Insta sign the same piece of paper in which we (1) refer to The Product 
and your bill of sale date, (2) describe the change to this warranty and (3) agree to
make that change. 

 

Important:

Important: 
We recommend that you keep all origial packing materials, in the event that you need to 
ship the Product. 

Summary of Contents for 718























Reviews: