background image

INSTA GRAPHIC SYSTEMS

Heat Press Limited Warranty

Heat Press Limited Warranty

 

This limited warranty (“warranty”) is given only to the original end-use/retail purchaser 
(referred to in this warranty as “Original Purchaser”) of the accompanying product and 
accessories (collectively referred to in this warranty as “The Product”). 
What is covered? 

“The Product” includes Machines Parts and/or Accessories

 

The Product  includes Machines, Parts and/or Accessories.   

 

Except as otherwise provided herein, Insta Graphic Systems (“Insta”) warrants 
that The Product will be free from defects in materials and workmanship when
used under normal conditions. 

What is the length of the Warranty Periods? 

 

Machines:  Life time on the heating element, one year parts and 90 day labor
from the original purchase date.

from the original purchase date.

 

Machine Parts and Accessory Items:  90 days from the original purchase date. 

This warranty does not cover: 

 

Physical damage to the Product; 

 

Damage caused by improper installation, improper or abnormal use, misuse, 
neglet or accident (including but not limited to transporting The Product without 
the proper preparation and/or packaging);

p p

p p

p

g g);

This limited warranty is VOID if The Product has been altered or modified in any way
(including but not limited to attempted warranty repair without authorization from Insta
and/or alteration/removal of the serial number). 

 

What to do if you think your Product is eligible for warranty service:  Immediately report 
your issue to 

[email protected]

 or call Insta’s Service Center at 800-426-

3609.  Supply the model, serial number and purchase date of the equipment. 

 

What Insta will ask you to do? 
After contacting Insta you may be asked to deliver (by hand if you prefer) or send The
Product properly packaged, freight prepaid, to Insta or Insta’s service center together 
with your bill of sale. A Return Authorization is required for all returned goods.  Failure
t

bt i th RA ill

lt i th

f

l f th

hi

t

to obtain the RA will result in the refusal of the shipment.  

You are responsible for the cost of shipping, packing of The Product and 
insurance (if you desire).  You are also responsible for loss or damage to The
Product in shipping. 

If the problem reported concerning The Product is covered by this warranty and if you 
first reported the problem to Insta within the applicable warranty period, Insta will repair 
or replace The Product at Insta’s discretion

or replace The Product at Insta s discretion.  

Summary of Contents for 718























Reviews: