46
The RAID setting interface is as shown below; after selection, press Enter to set the next
item. After all settings finished, move the cursor to
【
Done
】
option and press Enter to finish
the RAID creation.
Array Type: Select RAID array type, including two options of RAID0 (Stripe) and
RAID1 (Mirror), please select according to the actual needs.
RAID0: allow 2 or more hard disks to make this RAID.
RAID1: allow 2 hard disks to make this RAID.
Array Size: Set the array size, it defaults to the maximum size.
Stripe Size: Select the stripe size.
After finishing the above settings, please select
【
Done
】
and press Enter. System will
prompt “WARNING
:
ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure
you want to create this volume ?(Y/N):” If you want to create the RAID volume, please input
Y, and all of the data in selected hard disks will be lost. If you don’t want to create the RAID