２９
BIOS Configuration
PCH SATA Configuration Menu Interface Instruction Table
Interface Parameters
Function Description
SATA Controller
SATA controller switching settings
Configure SATA as
As for SATA mode configuration, there’re two modes of [AHCI] and
[RAID] for setting.
SATA Port 0/1/2/3/4/5
Information of hard disks connected to onboard SATA port
0/1/2/3/4/5.
SATA RAID mode configuration
a.
Set the option of Configure SATA as to [RAID], press F10 to save settings, and system
restarts.
b.
During system startup, the following content will display on the screen:
Press<CTRL-I> to enter Configuration Utility…
Meanwhile, press [Ctrl] and [I] synchronously to enter SATA RAID configuration interface,
and one example is as shown in the following figure.
c.
After entering SATA RAID configuration interface, menu list information, information
of hard disk connected to SATA controller (hard disk ID number, hard disk type, hard disk
capacity as well as whether the hard disk is a volume member etc.), existed RAID volume
information (including volume ID number, name, RAID level, capacity, status, bootable
information or not) will be displayed.
Summary of Contents for NP5570M4
