49
Figure 3-44 Drive Configurations
c.
Select
Apply Changes
and press <Enter>.
7.
Add member drives on the screen shown below to add a span.
Note: Two drives are selected for a span.
The following table lists the parameters and descriptions.
Table 3-10 Parameters and Descriptions
Parameter
Description
Select Media Type
Indicates the drive medium type.
Select Interface Type
Indicates the drive interface type.
Logical Sector Size
Indicates the size of a logical sector.
Check All
Checks all drives.
Uncheck All
Unchecks all drives.
Apply Changes
Saves the configurations.
8.
Select
OK
on the popup screen and press
Enter
.
Summary of Contents for 3408 Series
