19
The drives in a RAID array shall be of the same type and specifications.
Procedures:
1.
Configure the UEFI mode and re-enter BIOS configuration screen.
2.
Log in to LSI SAS3508 management screen, switch to Advanced tab, select the
LSI SAS3508 controller from the existing RAID controller card list, and press
<Enter>.
3.3.1
Creating a RAID 0 Array in UEFI Mode
1.
On the popup screen, select
Configuration Management
and press <Enter>.
Figure 3-5 Selecting Configuration Management
2.
On the popup screen, select
Create Virtual Drive
and press <Enter>.
Figure 3-6 Selecting Create Virtual Drive
3.
Select
Select RAID Level
by pressing <
↑
> or <
↓
> and press <Enter>.
4.
Select
RAID 0
from the list and press <Enter>.
5.
Locate
Select Drives
by pressing <
↑
> or <
↓
> and press <Enter> to add member
drives.
Summary of Contents for 3408 Series
