8
MODES
Manual mode
You can adjust speed
2, 4, 6,……34, 36
P1 automatic mode
The speed changes periodically to
2, 4, 6, ….34, 36, 34,….6, 4 in 0,5 second
intervals between each speed.
P2 automatic mode
The speed changes periodically to
4, 8, 12,….32, 36, 32,…..12, 8 in 5 second
intervals between each speed.
P3 automatic mode
The speed changes periodically to 2 a 36 in 5 second intervals between each
speed.
USE
Connect the machine to the socket and turn on the main power switch located behind the bottom
cover to put the machine in "standby" mode. Press the button and the machine will start, press the
button again and the machine will return to the " standby " mode.
Please refer to the control panel chapter for description and function of each button.
If you start exercising in an upright position, please stand on the vibrating pad before turning on the
machine.
If you start exercising in a different position, it is better if you ask another person to operate the
buttons, or rather it is recommended that you start the exercise position upright then change the
position.
For your health and safety, please do not use the machine for more than 20 minutes to avoid your
body being overloaded with exercise.
MAINTENANCE
•
Please turn off the main power switch on the machine and plug off the power cord from the
socket before you start daily maintenance.
•
Do not use formaldehyde or other organic impregnating agents to clean the machine.
•
Please use a soft and dry cloth instead of damp to clean the main power switch and control
panel.
•
It is dangerous if fluid gets on the machine.
•
If the power cord is damaged, it must be replaced by a special cable or a replacement from
the manufacturer, replacement must be done by the manufacturer or a trained service
technician of the manufacturer or a similarly trained person to avoid possible electric shock.
•
Regular maintenance should be done every 20 hours of operation.
Maintenance consist of:
•
checking all moving parts of the machine (axes, joints moving the movement, etc.), if they are
lubricated sufficiently if not lubricate them immediately. We recommend common bicycling oil
and sewing machines or silicone oils.
•
Regular inspection of all components
– regularly tighten all nuts, bolts and screws
•
For cleaning, use only soap and wet cloth and not abrasive cleaners.
