3
SAFETY INSTRUCTIONS
Follow the instructions and warnings below. This will prevent damage to the device, injury or property
damage that may result from improper use of the device. Read the manual carefully before using the
product for the first time and keep it for future reference.
•
Regularly check all screws, nuts and other parts. If it is necessary, tighten all screws and nuts.
Regularly check for sign of wears and damage. Never use damage or wear product. Damaged
or worn parts replace immediately. Do not modify the product.
•
Properly connect the power cord. Power cord should not be compressed or deformed by the
device.
Not following the instruction may cause damage to socket or power cord which can result in
electric shock or fire.
•
Do not connect additional devices to the socket.
Connecting multiple devices to one socket may lead to fire. Doing so may damage the fuse or
cause the device to malfunction.
•
Clean the power cord and plug with dry cloth.
Dirt on the plug may lead to incorrect connection, which may cause a fire.
•
Keep the distance between device and the wall at least 20 cm.
It is necessary to provide enough space for ventilation and for save use. For safety reasons,
keep a free area around the device min. 0.6 m.
•
Place the device on solid, flat and clean surface.
Placing on uneven ground can lead to excessive noise and instability of the device. Stabilize
the device with the adjusting feet.
•
After finishing the exercise press the STOP button. Do not leave the device until it stops
completely.
Leaving running device can lead to injury.
•
If you
don’t use the product unplug the socket.
This will prevent unnecessary power consumption and prevent fire.
•
Do not run or jump on the vibrating plate.
This can lead to damaging of product.
Seniors and children should only use the device under the supervision of a person familiar
with proper operation of the device.
Unproper use can lead to injury.
•
Only for one person at the same time.
Maximum weight limit:
120 kg
.
•
Before you start to clean the device, wipe all water and moisture with a dry cloth. Do not allow
water to enter the device.
Water inside the machine can cause electrical discharge and fire.
•
For cleaning use suitable cleaning detergent. Do not use detergent on oil or alcohol base.
It is recommended that you first clean the dirt with a dry cloth and then use damp cloth to
clean it.
•
Clean and dry the device before storing.
Wipe away water and moisture from device to avoid corrosion.
•
Do not touch the plug or socket with wet hands.
