17
The he
art rate frequency monitoring system isn’t always accurate. Overexertion of organism
during training can lead to a serious injury or death. If you start to feel faint, stop the exercise
immediately!
DISTANCE:
Displays the distance from 0.0 - 99.99 km. When the count reaches 99.99, it will reset
and begin counting again from 0.0. When in Countdown Mode, it will count down from the desired
setting to 0.00. When it reaches 0.00, the machine will stop smoothly,
display “End” and automatically
reset to the initial settings after 5 seconds. When setting programs, this window will show programs P1
- P24, U1 - U3
, and “FAT”.
TIME:
Displays the running time from 0:00 - 18 hours. When the count reaches the maximum of 18
hours, the machine will reset to 0:00 and continue to operate. When in Countdown Mode, it will count
from the set time to 0:00. Once the count reaches 0:00, the machine will stop smoothly and display
“End”, then automatically reset to the initial setting after 5 seconds.
CALORIES/INCLINE:
Displays the amount of calories burned from 0 to 999 kcal and the incline level
from 0 - 15. When the count reaches 999, it will reset and start back from 0. When in Countdown
Mode, it will count down from the desired setting to 0. Once it reaches 0, the machine will stop
smoothly and display “End”, then automatically reset to the initial settings after 5 seconds.
STEPS:
Display steps that the user has walked. While displaying steps, it will count from 0 to 99999,
when up to 99999, it will count again from 0.
MATRIX:
The matrix window will display a 400 m running track. Once you finish running the lap, the
machine will beep and show the number of laps you
’ve completed.
FUNCTION KEYS
PROGRAM:
Press this button to cycle through and choose a program. Programs range from P1 - P24,
U1 - U3
, and “FAT”. P1 - P24 are preset programs.
MODE:
When the treadmill is stopped, press this button to select a Countdown mode.
15:00 mins is the set Countdown for TIME
Km is the set Countdown for DISTANCE
50 kcal is the set Countdown for CALORIES
When setting each Countdown Mode, you can press the speed
+/
–
keys to increase or decrease from
the set data. Press START to start the machine.
START:
To start the machine, insert the magnet end of the safety key (C31) into the console and
press the START button. (This machine requires a safety key in order to operate)
STOP:
When the treadmill is in motion, press the STOP button at any time to stop the running belt.
Stopping the treadmill will reset all data to its initial setting.
SPEED
+/
– BUTTONS:
When the machine is running, press the
+/
–
buttons to increase or decrease
the speed in increments of 0.1 km/
time; holding either of these keys for a duration of over ½ a second
will increase or decrease the speed continually.
INCLINE
+/- BUTTONS:
Under setting mode, you can press this button to adjust value. When the
machine is running, press the up & down buttons to increase or decrease the incline in increments of
1/time
. Pressing and holding either of these buttons for duration of over ½ a second will increase or
decrease the incline continually. The incline range is from 0 - 15.
QUICK SPEED BUTTONS 3, 6, 9, 12:
These buttons are quick speed presets which allow you to
select an automatic running speed of 3, 6, 9 or 12 km/h instantly with the push of a button.
QUICK INCLINE BUTTONS 3%, 6%, 9%, 12%:
These buttons are quick incline presets which allow
you to select an automatic running incline of 3%, 6%, 9%, or 12% instantly with a push of a button.
MP3 SLOT:
You can connect your mobile phone with the MP3 wire to play music. All song selection
functions should still be operated from your mobile device.
USB SLOT:
You can also connect your mobile device via USB connection. USB connection also
charges your battery while in use.