background image

 

17 

15 

Displayed E08 on the 
screen 

Overload protector 

If it is not overload, then add oil for 
running board, change the running 
belt or running board, change the 
PCB in turn to check! 

16 

Displayed E09 on the 
screen 

Overhot protector 

Stop the machine and make it to be 
cold. If it happens when in normal 
temperature, then replace PCB. 

17 

Displayed E10 on the 
screen 

Overvoltage protector 

Check the voltage, whether it is 
normal! 

18 

Displayed E12 on the 
screen 

Incline alarm 

Check the VR wire, AC wire, 
connecting wire of incline motor, 
incline motor and PCB, whether 
they are connected well or broken. 
After checking, restart the PCB. 

 

If you still can’t solve the problems after taking the solutions above, we hope that you can contact our dealer or 
company as soon as possible. 

TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS 

General Conditions of Warranty and Definition of Terms 

All  Warranty  Conditions  stated  hereunder  determine  Warranty  Coverage  and  Warranty  Claim  Procedure. 
Conditions  of  Warranty  and  Warranty  Claims  are  governed  by  Act  No.  40/1964  Coll.  Civil  Code,  Act  No. 
513/1991 Coll., Commercial Code, and Act No. 634/1992 Coll., Consumer Protection Act, as amended, also in 
cases that are not specified by these Warranty rules. 

The  seller  is  SEVEN  SPORT  s.r.o.  with  its  registered  office  in  Borivojova  Street  35/878,  Prague  13000, 
Company Registration Number: 26847264, registered in the Trade Register at Regional Court in Prague, Section 
C, Insert No. 116888. 

According to valid legal regulations it depends whether the Buyer is the End Customer or not. 

“The Buyer who is the End Customer” or simply the “End Customer” is the legal entity that does not conclude 
and execute the Contract in order to run or promote his own trade or business activities. 

“The Buyer who is not the End Customer” is a Businessman that buys Goods or uses services for the purpose of 
using  the  Goods  or  services  for  his  own  business  activities.  The  Buyer  conforms  to  the  General  Purchase 
Agreement and business conditions to the extent specified in the Commercial Code. 

These  Conditions  of  Warranty  and  Warranty  Claims  are  an  integral  part  of  every  Purchase  Agreement  made 
between the Seller and the Buyer. All Warranty Conditions are valid and binding, unless otherwise specified in 
the Purchase Agreement, in the Amendment to this Contract or in another written agreement. 

Warranty Conditions 

Warranty Period 

The  Seller  provides  the  Buyer  a  24  months  Warranty  for  Goods  Quality,  unless  otherwise  specified  in  the 
Certificate of Warranty, Invoice, Bill of Delivery or other  documents related to the Goods. The legal  warranty 
period provided to the Consumer is not affected. 

By the Warranty for Goods Quality, the Seller guarantees that the delivered Goods shall be, for a certain period 
of  time,  suitable  for  regular  or  contracted  use,  and  that  the  Goods  shall  maintain  its  regular  or  contracted 
features. 

The Warranty does not cover defects resulting from: 

User’s fault, i.e. product damage caused by unqualified repair work, improper assembly, insufficient insertion of 
seat post into frame, insufficient tightening of pedals and cranks 

Improper maintenance 

Summary of Contents for IN 6937 Aluvis





















Reviews: