9
Add SILICONE from the center of the running board to the running belt’s the left and right side which should
minus 6 cm.
3.3
Level Adjustment
The treadmill will wobble during workout and the incline angles will be affected if it is placed on uneven
ground.
The level adjustment method is as follows:
Turn A counter-clockwise to loosen it
Adjust B to the proper height
Turn A clockwise to tighten it.
The left side adjustment method is the same with the right side.
3.4
Power Switch
The Power Switch is on the bottom panel of the treadmill. 1 means on, 0 means off.
3.5
Running Belt Adjustment
After assembling the treadmill, check the operation of the running belt.
First, make sure the power supply is correct. After starting the treadmill, stand on the two sides of the pedal (At
the very start, don’t stand on the running belt). Press QUICK START key and then increase the speed to
4.0MPH (6.4KPH) by pr key.
If the running belt is moving towards the right side
:
:
:
:
Summary of Contents for IN 6923
