8
240+
50/60
9
Wirings should be transported according to the electric law of the local country. High pressure wires, low
pressure wires and underground wires should be transported separately and can’t connect with or twist other
wires.
Improper connection of the grounding plug can result in the risk of electric shock. Check with a qualified
electrician or serviceman if you are in doubt as to whether the products are properly grounded. Do not modify
the plug provided with the product – If it will not fit the outlet, have a proper outlet installed by a qualified
electrician.
3.2
Add Lubricant
Use the Hex Wrench to unscrew the hex screws inside the Rear End Cap. Then pull the belt up and daub some
SILICON to the center of the board. After that, adjust the belt to the center of the deck, followed by tightening
the screw to the original set. Half a month should be checked once.
•
Time of add SILICONE
When suggested time of adding SILICONE is achieved, please extend your hand to the center of the running
board to make sure whether there is any SILICONE before adding. If no SILICONE on the running board,
please add 30cc SILICONE to the running board. If there is still a little SILICONE, add 15cc SILICONE to the
running board.
•
Area of adding SILICONE
Summary of Contents for IN 6923
