9
STEP 2:
A. Using 1x Hexagonal Bolt M10x35 (13) and 1x Hexagonal Bolt M10x30 (14), attach the Left
Handlebar (6L) to the hole in the Rear Base Frame (2).
B. Next, attach the curved Position Metal Sheet (12) to the end of the first Hexagonal Bolt
M10x35 (13) making sure the Connect Sheet (4) is in the middle. Secure the Hexagonal Bolts
(13 &14) with 4x Flat Washers M10 (15) and 4x Lock Nuts M10 (16) as shown.
Follow the above instructions to attach the Right Handlebar (6R).
C. If open, close the Position Metal Sheets (12) so they rest against the A-Frame, securing Part 4
in place.
D. IMPORTANT: Attach 2x Screws M6x10 (17) onto each side of the base frame after attaching
and closing the Position Metal Sheet (12) on the
Base frame. This assembly will prevent the
Backrest Support Frame (3) from slipping out of the housing during use.