10
STEP 3:
A. Insert Foam Roller Tube (20) into hole in Body Height Adjustment Tube (7) as shown, and
tighten with 1x Hexagonal Bolt M6x42 (32), 1x Flat Washer M6 (33) and 1x Lock Nut M6 (21).
B. Insert the Adjustable Leg Hold Tube (9) into the Adjustment Tube (7). Attach the Short Plug
(18) to the Adjustment Tube, and secure the spring to the rear of the Adjustment Tube (7) with
1x Hexagonal Bolt M6x42 (32), 1x Flat Washer M6 (33) and 1x Lock Nut M6 (21). (See
diagram above left for detailed directions)
C. Insert 2x Foam Rollers (49) onto Foam Roller Tube (20) and 2x Foam Rollers onto the
Adjustable Leg Hold Tube (9). Slide the Foot Rest Plate (8) into bottom of Body Height
Adjustment Tube (7) and tighten with 1x Hexagonal Bolt M8x45 (29), 1x Flat Washer M8 (25),
and 1x Lock Nut M8 (45).
D. Insert the Body Height Adjustment Tube (7) into the Backrest Support Frame (3) tubing.
Secure it with Plug with Ring (23) and Long Plug-with spring (22). Make sure that these
connections are tight and secure before continuing.
E. NOTE: On some models, the Safety Lock will ship attached. If this part is not pre-assembled:
F. Remove attached hardware and attach the L-Shaped Hook (44) through the hole in the Front
of the A-Frame. Secure from the other side in this order: Spring-2 (47), Washer M8, 1x Lock
Nut M8.