8
ASSEMBLY INSTRUCTIONS
1. FRONT AND REAR STABILIZER
•
Place the front stabilizer (27) to the front part of the main frame (12). Bolt holes should align.
•
Attach the front stabilizer (27) to the front curve of the main frame (12) using two cap nuts M10
(5), two curve washers
ø10x2.0x ø25 (4) and two bolts M10x57 (3).
•
Tighten all nuts with included multi hex tool.
•
Place the rear stabilizer (2) onto the rear part of the main frame (12). Bolt holes should align.
•
Attach the rear stabilizer (2) onto the rear curve of the main frame (12) using two cap nuts
M10 (5), two curve washers
ø10x2.0xø25 (4) and two bolts M10x57 (3).
•
Tighten all nuts with included multi hex tool.
2. LEFT/RIGHT HANDRAIL AND FOOT BARS
•
Place the rotation rod (73) into the hole of the main frame (12).
•
Slide the left and right handrail (67,68) onto the rotation rod (73) and secure them with two
bolts M10x18 (70), two spring washers
ø18xø10x3 (71), two D washers ø28xø16 (72), two
wave washers ø28xø17x0.3 (55).
•
Tighten all bolts with two Allen wrenches (6 mm) that included.
•
Attach the left foot bar (53) onto the left crank (21) using one bolt
ø16xø89xL23 (54), one
wave washer ø28xø17x0.3 (55), one spring washer ø20xø13x2 (56) and one nylon nut (57)
for left crank.
•
Tighten all bolts and nuts using one 8-mm Allen wrench and the multi hex tool, that provided.
Turn anti-clockwise to secure it.
•
Follow the same procedure to attach the right foot bar (53) to the right crank (21).
•
The right foot bar (53) is attached by using bolt (65),
wave washer ø28xø17x0.3 (55), one
spring washer ø20xø13x2 (56) and one nylon nut (64). Turn clockwise to tighten it.
NOTE:
Bolt (65) for the right crank is marked with “R” and bolt for left crank is marked with “L”.
•
Install four nut caps S16 (61) onto bolts M10x55 (62) and hex locknut M10 (31) on both foot
bars (53).
•
Attach the left foot pedal (60) to the left foot bar (53) with two bolts M10x45 (59) and nylon
nuts M10 (31). Tighten all nuts with the included multi hex tool.
•
Follow the same procedure to attach the right foot pedal (60) to the right foot bar (53).
