![background image](http://html1.mh-extra.com/html/insportline/in-13785/in-13785_user-manual_2069090005.webp)
5
PRACTICAL INFORMATION
The size can be adjusted in four levels, as shown in pictures below, just by pushing a special
button (Pic. B) and without having to use any tool. Push the button and pull the toe cap with
your other hand. Choose the right size (A, B, C, D) and fix it in position by releasing the
button.
Pulling the right toe cap may cause braking or total stopping while skating. To brake and stop
safely, install the brake so that it meets the ground.
Never do any improper modification. You could reduce product safety.
This product shall not be preset. The brake is on the right skate (Pic. C). To use it, slightly lift
the right tiptoe so that the brake is in contact with the ground.
A) Roller Skate Profile
B) Adjustment Button
C) Brake
ROLLER SKATING TECHNIQUE
Learn to skate and stop safely and properly before first using. If you are not sure, ask an
experienced person for advice.
Use the roller skates only in suitable places without any traffic or pedestrians, where there is
no prohibition or restriction to do it.
Bend your knees so that your toes are hidden under them while being looked from above to
keep balance.
In case of some fall stretch your hands forward to reduce the impact. Used protectors (wrist,
knee and elbow) can protect you from being hurt. Pay attention and skate reasonably,
because no protective component can provide the absolute protection.
Take the skate posture. That means, keep your body to the ground as low as possible for
better balance. Knees are bent and shoulders slightly forward. Keep your hands low and
forward.