24
E21
SCREW
ST2.9*6
17
E22
SCREW
ST4.2*12
16
E23
WASHER
φ26*φ10*2.0
2
E24
WASHER
6
3
E25
WASHER
8
14
E26
WASHER
8
6
E27
WASHER
8
7
E28
SCREW
ST2.9*4
4
E29
SCREW
ST3.5*10
2
TROUBLE SHOOTING GUIDE
1. There is no display on screen after the machine is connected to the power source
a. Please check the overload button, if the overload protector button bounces, please press this
button;
b. Please make sure the power source, overload protector, the driver and the transformer are
connected well;
c. Please make sure the wires from the driver to the computer board are connected well.
d. Check the transformer, if it is wrong, please replace it by a new one.
2. E01 on display: Failure of signal from computer board to the driver
a. Please check the wire from the drive to the computer board, if the wire is broken, please
replace it.
b. Please check the electronic parts in computer board, if it is wrong, replace it;
c. Replace the transformer.
3. E02 on display: Anti-explosion protect or motor problem
a. Please check the wire from motor and connect the wire well. If there is no problem with the
wire connection, please replace the motor.
b. If there is a bad smell from the control board and the IGBT shorted out, please replace the
driver;
c. Please make sure the voltage is in normal condition.
4. E03 on display: No signal
a. If the E03 is being displayed 5 to 8 seconds after the start, there is no signal. Please check the
sensor connection. If it is not connected well, please connect again. If the sensor do
esn’t
work, replace it;
b. The signal of the control board is wrong, please replace the driver.
5. E04 or E06 on display: The failure of incline
a. Please check that the signal wire of the incline motor is connected well;
b. Please check that the AC line of the incline motor is connected to the right slot;
c. Please check the wire of the incline motor and if necessary, replace it or the incline motor;
d. Please replace the driver;
e. If the wires are connected well, please reset the button on the driver and start again.
Summary of Contents for IN 13150
Page 1: ...USER MANUAL EN IN 13150 Motorized treadmill inSPORTline Lavister...
Page 19: ...19...
Page 20: ...20 EXPLODED DRAWING...