background image

22) 

WARNING!

  The  heart  rate  frequency  monitoring  may  not  be  completely  accurate. 

Overexertion during training can lead to a serious injury or even death. If you start to feel faint, 
stop the exercise immediately. 

Remove the safety key after use to prevent unauthorized treadmill operation. 

IMPORTANT ELECTRICAL INFORMATION 

WARNING! 

1)  NEVER  use  a  ground  fault  circuit  interrupter  (GFCI)  wall  outlet  with  this  treadmill.  Route  the 

power cord away from any moving part of the treadmill including the elevation mechanism and 
transport wheels. 

2)  NEVER operate the treadmill on a generator or UPS power supply. 

3)  NEVER remove any cover without first disconnecting the AC power. 

4)  NEVER  expose  this  treadmill  to  rain  or  moisture.  This  treadmill  is  not  designed  for  use 

outdoors, near a pool, or in any other high humidity environment. 

IMPORTANT OPERATION INSTRUCTIONS 

1)  Insert the power plug into the socket directly. 

2)  The  constant  running  time  is  less  than  2  hours.  Be  sure  to  read  the  entire  manual  before 

operating your machine. 

3)  Understand  that changes  in  speed  do  not  occur  immediately.  Set  your  desired  speed  on  the 

computer  console  and  release  the  adjustment  key.  The  computer  will  obey  the  command 
gradually. 

4)  Use  caution  while  participating  in  other  activities  while  walking  on  your  treadmill;  such  as 

watching  television, reading, etc.  These  distractions  may  cause  you  to  lose  balance  or  stray 
from walking in the center of the belt; which may result in serious injury. 

5)  In order to prevent losing balance and suffering unexpected injury, NEVER mount or dismount 

the treadmill while the belt is moving. This unit starts with a very low speed. Simply standing 
on the belt during slow acceleration is proper after you have learned to operate this machine. 

6)  Always hold on to handrail while making control changes. 

7)  A  safety  key  is  provided  with this  machine.  Remove  the  safety  key  will  stop  the  walking  belt 

immediately; the treadmill will shut off automatically. Insert the safety key will reset the display. 

8)  Do  not  use  excessive  pressure  on  console  control  keys.  They  are  precision  set  to  function 

properly with little finger pressure. 

9)  This  appliance  is  not  intended  for  use  by  persons  (including  children)  with reduced  physical, 

sensory  or  mental  capabilities,  or  lack  of  experience  and  knowledge, unless  they  have  been 
given  supervision  or  instruction  concerning  use  of  the  appliance  by  a  person  responsible  for 
their safety, Children should be supervised to ensure that they do not play with the appliance. 

10) Please consult your doctor at first before running, if you have one of the following diseases:  

a.  Cardiomyopathy,  hypertension,  sugar  diabetes,  respiratory  disease,  smoking,  and 

other chronic diseases. 

b.  If you are over 35 years old and heavier than common weight. 

c.  Women in pregnant or in breasting period.  

11) Please  stop  exercising  immediately  and  consult  your  doctor  when  you  feel  giddy,  surfeit, 

thorax ache or other symptoms. 

12) Please drink adequate water after taking exercises on our treadmill for more than 20 minutes. 

Summary of Contents for IN 13150




























Reviews: