![background image](http://html1.mh-extra.com/html/insportline/in-10895-incondi-ub20m/in-10895-incondi-ub20m_user-manual_2069015011.webp)
11
74
Handlebar cap
2
RESISTANCE ADJUSTMENT
To ensure smooth efficient cycling action, the tension belt braking system on your Exercise Cycle has
been correctly adjusted by our factory during production.
To adjust the pedaling resistance during use, start by turning the Tension Control (19) fully ANTI-
CLOCKWISE at the start of your workout. Gradually increase the pedaling resistance by turning the
Tension Controller Knob CLOCKWISE as required
.
LEVELLING THE BIKE
For security and stability, your bike has a factory welded frame and once fully assembled correctly,
should not need further alignment. However, in the interest of safety, please always ensure that your
Cycle is positioned on a solid, flat surface. If necessary, use a rubber mat underneath to reduce the
possibility of slipping in use. If you need to make a fine adjustment, simply twist the end of either Rear
Frame Stabilizer Adjustable Hex End Cap (27) to compensate for uneven floors.
HOW TO FOLD
Using the Locking Pin (3) to fold and unfold the Bike. When in use, the Locking Pin (3) is in position A.
When folded, the Locking pin (3) is in position B.