Insportline Halimed, User Manual, Page: 9 / 20

9
STEP 3
Connect sensor cables (A3 and A4). Connect both frames (A1 and A2) with 6 screws (N5), spring
washer (N2) and washer (N3). Make sure the wires are properly connected. Be careful not to pinch the
cables.
STEP 4
Slide the middle post (D) through the decorative cover (I).
Connect the cables (A33 and A34) to the cables (A4 and A36).
Attach the middle post (D) to the main frame (A1) with 3 screws (N1), spring washer (N2) and washer
N3).
Make sure that the cables are properly connected and are not pinched between the main frame and
the post.