Step One:
Connect the Extension Wire (43) to the Sensor (11)
which is in the Lower Vertical Tube (3), and then insert
the Lower Vertical Tube (3) into the Main Frame and fix
with Allen Bolt (48) and Arc Washer (38).
Step
Two:
Connect
the Extension
Wire
（
）
43 to
the other
Wire
（
）
43 ,
and then insert
Upper Vertical
Tube (4) into
Lower Vertical
Tube (3), then
fasten them
with Allen Bolt
(48) and Arc
Washer (38).
Step Three:
Fix the
Handlebar (5) onto
Upper Vertical Tube (4)
with Hex Socket
Cylindrical Bolt
(46) and Spring
Washer (45) and
then cover with the Handle Chuck Cover (47).
Step Four:
1. Pull the Extension Wire (43) through the hole of
Computer Bracket (6), and then insert Computer Bracket (6)
onto the Upper Vertical Tube (4).
2. Connect the Extension Wire (43) with the wire coming
from Computer (7) well and insert the Computer (7) into the
Computer Bracket (6).
