![background image](http://html1.mh-extra.com/html/insportline/bodycraft-in-23288/bodycraft-in-23288_user-manual_2069074011.webp)
11
STEP 5
1. Fig. C1 - fasten 2x 90 mm pulleys (33) to the double pulley holder (13) with 2x 3/8 "X 1-3 / 4"
hexagon bolts (42) and 2x 3/8 ”nylon nuts (42) with cable guided according to picture.
2. Fig. C2 - Attach the 114 mm pulley (32) to the top frame (2) with a 3/8 "X 1-3 / 4" hex bolt (42)
and a nylon nut (57) with the cable (36) guided as shown.
3. Fig. C3 - attach the 90 mm pulley (33) to the top frame (2) with a 3/8 "X 1-3 / 4" hex bolt (42)
and a 3/8 ”nylon nut (57) with a cable, (36) guided according to picture.
4. Fig. C4 - Attach the 90 mm pulley (33) to the holder (14) with the 3/8 "X 1-3 / 4" hex bolt (42)
and the 3/8 ”nylon nut (57) with the cable (36) guided as shown.
5. Fig. C5, C6 - attach the 50 mm pulley (34) to the main upright frame (3) with a 3/8 "X 1-3 / 4"
hex bolt
(42) and a 3/8 ”nylon nut (57) with a cable (36) guided according to the picture.
6. Fig. C7 - Attach the terminal to the left cable holder (12). Repeat for the other side.
Important: The tension and length of the cable (35) can be adjusted by turning the nuts Fig. C7. For
tensioning / shortening clockwise, for releasing / extending counterclockwise.