13
BATTERY INSTALLATION AND REPLACING
1. Use your finger or a simple tool to remove the cover from the meter back.
2. The meter is powered by two batteries. Replace them as shown in picture.
NOTE:
•
Do
n’t mix new and older batteries.
•
Use the same battery type. Don’t mix alkaline batteries with another type.
•
Dispose batteries according to local laws.
•
Never put batteries in fire.
STORAGE
1. Store it in a clean and dry place.
2. If you store it for one year and longer, remove batterie.
3. To move it, use moving wheel end cap (26) on the front of the base frame (1). Catch the rear
stand (4) to transport it. Never use the seat (31) to transport it. The seat could slide and its
carriage could crush your fingers.
4. If you store it for longer than one month, empty the water tank.
5. Fold it as shown in pictures below:
o
Remove the fixing lever (46) and washer (76) from the main frame (2).
o
Fold the rail (3) and lock in the folded position using the fixing lever (46) and washer
(76). Make sure the rail (3) is properly secured and doesn’t drop down.
