manualshive.com logo in svg

Inspire SLEEP REMOTE, Manual

Share
Download
Inspire SLEEP REMOTE Manual Download Page 43

Inspire Sleep Remote

English 29

To increase stimulation strength:

1.

Press the Increase button (

).

Note:

If the sleep remote beeps rapidly three times, and 

the upper limit light (

) on the back of the remote is on, 

you have reached the upper limit.

2.

Position the sleep remote directly over your generator 
and against your body with the buttons facing away from 
your body (Figure 15).

3.

Wait until the sleep remote produces a tone or 10 
seconds pass.

4.

To test the new stimulation strength:
a.Turn therapy off. 
b.Turn therapy on. You will receive one short stimulation 

immediately when therapy is turned on.

Decreasing Stimulation Strength

The sleep remote allows you to decrease the 

stimulation strength within a range set by your doctor. 

If stimulation feels too strong, you may want to 

decrease

 (

) the stimulation strength. Stimulation 

strength can be decreased with therapy on or off.

The stimulation strength gauge on the back of the sleep 
remote indicates the current stimulation strength. If only one 
bar on the gauge is lit, then stimulation strength is at the 
lowest allowed setting. (For information on the stimulation 
strength gauge, refer to page 14.)

Summary of Contents for SLEEP REMOTE









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands