manualshive.com logo in svg

Inspire SLEEP REMOTE, Manual

Share
Download
Inspire SLEEP REMOTE Manual Download Page 28

14 English

Inspire Sleep Remote

does not respond to a gentle shake, press the Therapy Off 
button (

) and wait for 10 seconds.

Stimulation Strength Gauge

Your doctor may have provided a range of stimulation 
strength values for you to use. If you have a range of 
stimulation strengths available, the increase (

) and 

decrease (

) stimulation strength buttons allow you to 

change the stimulation strength. 
The stimulation strength gauge on the back of the sleep 
remote indicates the current stimulation strength, and if the 
stimulation strength has reached the upper or lower limit 
(Figure 8). The stimulation strength gauge color also 
indicates if therapy is on, off, or paused. 

Note:

If your doctor did not program a range of stimulation 

strengths for you to use, the Increase (

) and Decrease 

(

) buttons do not change your stimulation strength.

Figure 8.

Stimulation strength gauge

Stimulation 
strength 
gauge

Upper limit 
light

Summary of Contents for SLEEP REMOTE









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands