manualshive.com logo in svg

Inspire SLEEP REMOTE, Manual

Share
Download
Inspire SLEEP REMOTE Manual Download Page 16

2 English

Inspire Sleep Remote

About This Manual

This manual provides information on using and maintaining 
your Inspire Sleep Remote. The sleep remote should only 
be used according to the instructions in this manual and the 
instructions provided by your doctor.
This manual also contains information about Inspire therapy. 
This includes answers to common questions about living 
with an Inspire system. For additional information about your 
implanted Inspire System, refer to the Patient Manual you 
received after your implant surgery.
Information is provided about what to do if you encounter 
problems with your Inspire system and when you should call 
your doctor. If you have questions that are not answered in 
this manual, or if any unusual situations or problems occur, 
talk to your doctor. For more information about Inspire 
therapy and the Inspire system, refer to “Inspire Therapy” on 
page 3 and your Inspire Patient Manual.

Package Contents

The sleep remote package contains the following:

• One Inspire Sleep Remote
• Two AAA or LR03 alkaline batteries
• Sleep Remote Manual and Quick Guide

Summary of Contents for SLEEP REMOTE









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands