1
– 3 ½” Pulley
1
– 3 ½” Pulley
1
– 2” Hex Bolt
1
– 2” Hex Bolt
2
– 3/8” Flat Washers
2
– 3/8” Flat Washers
1
– 3/8” Lock Nut
1
– 3/8” Lock Nut
1 – 2” Hex Bolt
2
– 3/8” Flat Washers
1 – 3/8” Lock Nut
2” Hex Bolt
2
– 3/8” Flat Washers
1 – 3/8” Lock Nut
Step 7: Attach Pulley 8 to Attachment Arm using:
One (3 ½” Pulley)
One (3/8” x 2” Hex Bolt)
Two (3/8” Flat Washers)
One (3/8” Lock Nut)
Step 8: Attach Pulley 9 to Floating Dual Pulley Bracket using:
One (3 ½” Pulley)
One (3/8” x 2” Hex Bolt)
Two (3/8” Flat Washers)
One (3/8” Lock Nut)
Step 9: Route Home Gym Middle Cable around Pulleys 8 & 9 and attach eyelet end to
Attachment Arm (bottom Hole) using:
One (3/8” x 2” Hex Bolt)
Two (3/8” Flat Washers)
One (3/8” Lock Nut)
Step 10: Attach Retainer Bolt to Attachment Arm using:
One (3/8” x 2” Hex Bolt)
Two (3/8” Flat Washers)
One (3/8” Lock Nut)
(Wrench Tighten Bolts in Steps 7-10 Now)
(Make sure that the cable is routed between pulley 8 and the cable retainer bolt.)
Assembly Steps are continued on page 15
Page 11
STEP 8
STEP 7
Pulley-9
Pulley-8
STEP 9
STEP 10
Floating Dual
Pulley Bracket
Cable
Retainer
Bolt
