A.) Carefully unpack contents of box leaving the 3 large styrofoam frame support blocks in place. Inside the
packaging locate the Styrofoam block (with Red Sticker) packed near the Console Assembly. Place aside for use
in STEP 2.
B.) Remove large styrofoam frame support from REAR portion of frame. The Rear Stabilizer mounting bracket
should now be exposed.
C.) Place Rear Stabilizer Tube Assembly (#28) underneath the Rear Mounting Bracket.
Ensure that the transport
wheels are facing backwards.
D.) Attach the Rear Stabilizer Tube to the frame as shown in FIGURE 1 with qty 2 M8x70 carriage bolts (#27), qty 2
M8 curved washers (#29) and qty 2 M8 acorn nuts (#30).
E.) Remove large styrofoam frame support from FRONT portion of frame. The front mounting bracket should
now be exposed.
F.) Place Front Stabilizer Tube (#62) underneath the front mounting bracket.
G.) Attach the Front Stabilizer Tube (#62) to the front mounting bracket as shown in FIGURE 1 with qty 2 M8x70
carriage bolts (#27), qty 2 M8 curved washers (#29) and qty 2 M8 acorn nuts (#30).
NOTE: To install Child Safety Lock System. Remove M8 Acorn nut from left side and refer to Child Safety
Lock Installation instructions included in packaging.
H.) Attach Right Cam Lock Handle (#70) and tighten qty
2 socket screws (#69).
NOTE: Ensure that the Right Cam Lock Handle has an “R” sticker on it.
I.) Attach
Left Cam Lock Handle (#80) using qty 2 socket screws (#69).
NOTE: Ensure that the Left Cam Lock Handle
has an “L” sticker on it.
6