CHANGE NAME: Scrolling message reads “CHANGE NAME?” 1 time and then “NO” is
displayed on the scrolling message . Press the UP or DOWN key to toggle between “YES” and
“NO”.
a.
o
Press START on “YES” to MODIFY CURRENT USER NAME.
b.
o
Press the UP or DOWN key to scroll through 36 alpha-numeric characters (26 letters
A-Z, 10 numbers 0-9) and 1 blank space.
c.
o
Press the START key to accept alpha-numeric character and move to next space. If
START is pressed before either UP or DOWN is pressed, a BLANK space is used in that location.
d.
o
Press the RESET key to move back to the previous location.
e.
o
A blinking underscore (“_”) is used to show the current location.
f.
o
A Maximum of 8 alpha-numeric characters may be used.
g.
o
After pressing START past at 8
th
space, USER NAME is set.
h.
o
START may be pressed at any time for 2 seconds to set the USER NAME and go to
PROGRAM selection.
