7
①
Measure mode
Under the menu of measure mode, there are three kinds of mode:
Average value mode, maximum value mode and maximum
average value mode.
Average value mode: During one sampling process, the durometer
will record 20 values and calculate the average value of this 20
value automatically.
The average value will show on the screen. Under this mode, the
statistic times can be set. After one measure process is finished,
the durometer will calculate the average value and peak difference
of the data until now automatically. If the statistic time is meet, the
last average value will be saved as the measure result.
Maximum value mode: During one sampling process, the
durometer will record 20 values automatically and take the
maximum value as the current result. Under this mode, the
Maximum average value mode: During one sampling process,
the durometer will record 20 values automatically and take the
maximum value as the current result. Under this mode, the statistic
times setting can be set. After one measure process is finished,
the durometer will calculate the average value and peak difference
of the data until now automatically. The average value of maximum
value of every measuring will be calculated and this value will be
taken as the last result.
②
Measure times setting
The statistic times can be set under this menu. The statistic times
will increase 1 by one pressing of button “UP”. The statistic times
will decrease 1 by one pressing of button “DOWN”. The continuous
increasing or decreasing will be realized by keep pressing the
button UP” or “DOWN”. The maximum statistic times setting is 9.
“
10
Fig 4-15
②
Backlight time setting
Under this menu, the continued lighting time of the backlight can
be set.
0s: The backlight will be turned off all times
15s: The backlight lighting 15 second every time.
30s: The backlight lighting 30 second every time.
45s: The backlight lighting 45 second every time.
60s: The backlight lighting 60 second every time.
Disable: the backlight will light all the time.
The selection will be modified by pressing button “UP” or “DOWN”.
The selection will be confirmed by pressing button “OK”. The
selection will be aborted by press button “RETURN”.
③
Key sound setting
The key sound can be turn on or off by this setting.
The selection will be modified by pressing button “UP” or “DOWN”.
The selection will be confirmed by pressing button “OK”. The
selection will be aborted by press button “RETURN”.
Fig 4-16
Fig 4-17
statistic times
can't be set.
Fig 4-8
