Schematic Wiring Diagram - Model CC-101K 208-240v 1Ø 1/2-2 hp
WARNING
ELECTRICAL SHOCK
•
Turn off all electrical supply to the disposer before attempting any work
on it. Use a voltmeter or circuit tester to ensure that power is off.
•
Installation must conform to local electrical codes.
•
All control centers and disposers must be carefully and permanently
grounded.
•
A properly fused disconnect must be installed at the electrical supply
source for the control center.
CAUTION
PROPERTY DAMAGE
• Ensure that the control center voltage and phase match the disposer
motor and electrical supply. Check nameplates on disposers and control
centers for voltage and phase specification.
• The disposer motor wiring connection is shown in the disposer terminal
box.
Note: • Red wires - Low voltage
(24 v) control
• Black wires - Line voltage
(208-240v) power
13
