A
4
OUTPOST
www.insingermachine.com
800-344-4802
INSTALLATION
INSTALLATION INSTRUCTIONS
1.
Carefully unbox the unit. Take caution not to damage components.
2.
Remove any plastic film that may be covering sheel metal parts.
FOR UNITS PLACED AGAINST A WALL:
1.
Push unit as close to the wall as possible.
2.
If desired, the unit can be secured to a wall by alligning a wall stud
to one of the holes in the back of the unit and then fasten with
apropriate screw.
3.
If the unit is greater than 3 inches away from the wall, it is
recommended that the rear foot be installed.
FOR FREE STANDING UNITS:
1.
Unlock the units hood and tilt foward.
2.
Locate the Rear Foot that is mounted to the upper back of the unit.
Remove the foot and retain the 4 screws and the 4 lockwashers.
3.
Install the Rear Foot to the back of the unit as illustrated. The slots
will allow for a certain amount of leveling. Ensure that the base of the
foot is in complete contact with the floor before tightening the
screws.
4.
Follow procedures to install a new bottle of sanitizing agent.
REAR FOOT
STORAGE
INSTALLATION
OF REAR FOOT
HOLES FOR WALL
MOUNTING
