Insignia NS-PDP42/50-09, User Manual

Page: 16 / 84

16
Insignia NS-PDP42/50-09 Plasma TVs
www.insignia-products.com
Setting up your TV for a PC video source
To select the screen resolution:
1 Press MENU , then press or to select
PICTURE .
2 Press ENTER . The PICTURE menu opens.
3 Press or to select SCREEN (RGB-PC) ,
then press ENTER . The
SCREEN
menu
opens.
4 Press or to select Resolution , then
press ENTER .
5 Press or to select the resolution you
want, then press ENTER .
You can also adjust the position, phase, and
size, or resetting the settings.
To use Auto Configure to adjust picture
position and minimize instability:
1 Press MENU , then press or to select
PICTURE .
2 Press ENTER . The
PICTURE
menu opens.
3 Press or to select SCREEN (RGB-PC) ,
then press ENTER . The SCREEN menu
opens.
4 Press or to select Auto config. , then
press ENTER .
5 Press or to select YES , then press
ENTER . Auto configuration begins.
If the position of the image is still not correct,
try Auto configuration again. If that does not
work, you can manually adjust the position,
size, or phase. This feature only works in
RGB-PC mode.
To adjust the position, size or phase:
1 Press MENU , then press or to select
PICTURE .
2 Press ENTER . The
PICTURE
menu opens.
3 Press or to select SCREEN (RGB-PC) ,
then press ENTER . The SCREEN menu
opens.
4 Press or to select the following:
• Position— Use this to adjust the picture
left/right and up/down.
• Size— Use this to minimize any vertical
bars or stripes visible on the screen
background. The horizontal screen size
also changes. The size adjustment range
is -30 ~ 30.