3
10” Steam Iron with Retractable Cord
www.insigniaproducts.com
4
Do not let the cord touch hot surfaces. Let the iron cool completely
before putting the iron away. Coil the cord loosely around the iron
when storing.
5
Always disconnect the iron from the electrical outlet before filling the
iron with water, emptying the water from the iron, and when the iron
is not in use.
6
Do not operate the iron with a damaged cord or if the iron has been
dropped or damaged. To avoid the risk of electric shock, do not
disassemble the iron. Take it to a qualified serviceman for examination
and repair. Incorrect assembly might result in a risk of electric shock
when the iron is used after reassembly.
7
Close supervision is required if the iron is used by or near children.
8
Burns can occur from touching hot metal parts, hot water, or steam.
Use caution when you turn a STEAM IRON upside down – there might
be hot water in the reservoir.
9
To avoid a circuit overload, do not operate an iron on the same circuit
with another high wattage appliance.
10
The iron must not be left unattended while it is plugged in.
11
The water inlet cover must not be opened during use.
12
The iron must be used and rested on a stable surface.
13
The iron is not to be used if it has been dropped, if there are visible
signs of damage, or if it is leaking.
14
Never use an extension cord that is not approved by a competent
authority. If an extension cord is absolutely necessary, a cord with an
ampere rating equal to or greater than 15A shall be used. A cord rated
for less amperage may overheat. Care shall be taken to arrange the
cord so that it cannot be pulled or the iron tripped over.
15
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible
for their safety.
16
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person in order to
avoid a hazard.
17
The plug must be removed from the socket-outlet before the water
reservoir is filled with water.
18
When placing the iron on its stand, ensure that the surface on which
the stand is placed is stable.
SAVE THESE INSTRUCTIONS
NS-IR10BL7_NS-IR10PK7_16-0214_MAN_V2_ENG.fm Page 3 Friday, April 22, 2016 1:03 PM
