17
Insignia NS-H3005 Home Theater System
www.insignia-products.com
Picture menu
To reset the home theater system:
1 Remove any DVD from the player and close
the disc tray. NO DISC is displayed on the
display window.
2 Press STOP and hold it for five seconds
before releasing it. The video output is
restored to the standard setting and a picture
is once again visible on a conventional
analog television or monitor.
Speaker Setup
You can use the Speaker Setup menu to select
speaker settings, including volume balance and
delay time, or test the speaker settings.
Menu
Description
TV aspect
4:3 Letterbox: Select when a standard 4:3
television is connected. Displays theatrical
movies with masking bars above and
below the picture.
4:3 Panscan: Select when a standard 4:3
television set is connected. theatrical
movies formatted in the Pan & Scan style
are played back in that style (both sides of
the picture are cut off).
16:9 Wide: Select when a 16:9 wide
television is connected.
Menu language Select a language for the Setup menu.
This is the menu you see when you press
SETUP.
Progressive
scan
Progressive Scan Video provides the
highest quality pictures with less
flickering.
If you are using the COMPONENT/
PROGRESSIVE SCAN VIDEO OUT jacks,
but are connecting the DVD Player to a
standard (analog) television, set
Progressive Scan to Off.
If you are using the Component Video
jacks for connection to a television or
monitor that is compatible with a
progressive scan signal, set Progressive
Scan to On.
Note
After the setting for progressive scan output is entered, an
image is only visible on a progressive scan compatible
television or monitor. If you set Progressive Scan to On in
error, you must reset the home theater system.
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Disc Audio
4:3
4:3
16:9
Letterbox
Panscan
Wide
English
Spanish
French
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Disc Audio
Off
On
Note
Speaker settings are only active on the Analog Multi-Channel
Output.
Menu
Description
Speaker
selection
Select a speaker that you want to set up.
• Front speaker (Left)
• Front speaker (Right)
• Center Speaker
• Rear speaker (Left)
• Rear speaker (Right)
• Subwoofer
Adjust options by using
,
,
, or
buttons.
Note: Certain speaker settings are
prohibited by the Dolby Digital licensing
agreement.
Volume
Press
or
to adjust the output level
of the selected speaker. (-6dB ~ +6dB)
Size
Speaker size settings are fixed, you
cannot change the settings.
Distance
If you connected speakers to your home
theater system, specify the distance from
each speaker to the listener so the sound
from each speaker reaches the listener at
the same time. (1 foot = 30.48 cm)
Note: You cannot set the distance of the
subwoofer.
Test
Press MEMORY/ENTER to test the signals
of each speaker.
Adjust the volume to match the volume of
test signals stored in the system.
• Front Left (Front L)
• Center
• Front Right (Front R)
• Rear Right (Rear R)
• Rear Left (Rear L)
• Subwoofer
Return
Press MEMORY/ENTER to return to the
previous menu.
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Disc Audio
R
R
Front L
Volume 0 dB
Size Small
Distance 1 ft
Test
Return
