12
Insignia NS-H3005 Home Theater System
www.insignia-products.com
PROGRAM DETAILS
Accessing the On-Screen menus
The SETUP, clock setting (CLOCK), and timer
recordings (PROGRAM) functions are accessed
with the on-screen menus.
Menu selection
Your VCR lets you use the remote control to
adjust several features.
To adjust a VCR setting:
1 Press MENU. The Main menu appears.
2 Select the submenu with the
or
buttons,
then press MEMORY/ENTER.
3 Press MENU when finished making
adjustments.
VCR Setup menu options
1 Press MENU. The Main menu appears.
2 Press
or
to select SETUP, then press
MEMORY/ENTER. The Setup menu
appears.
3 Press
or
to choose an option on the
Setup menu.
4 Press
or
to modify a setting.
5 Press MENU when finished making
adjustments.
Channel Selection
This home theater system is equipped with a
frequency synthesized tuner capable of
receiving up to 181 channels. These include
VHF channels 2-13, UHF channels 14-69 and
CATV channels 1-125.
To complete Auto Channel Programming:
1 Press MENU. The Main menu appears.
2 Press
or
to select TUNING, then press
MEMORY/ENTER. The Tuning menu
appears.
Detail
Description
LENGTH
Indicates the run time of a program.
TIME REMAINING
Indicates the remaining time of a
program.
RATING
Indicates the rating of the current
program (N/A, G, PG, PG-13, R, NC-17,
X, and Not Rated). The rating N/A
means that the motion picture ratings
are not applicable to this program.
Note
Menus remain on-screen for three minutes.
Easy Information Screen
(Station ID)
Easy Information Screen
(Program details)
Clock Set (page 13)
Program (page 20)
Tuning (page 12)
Setup (page 12)
Setting
Description
Function OSD
Turn on or turn off the on-screen display.
Select ON and OFF with
or
.
Audio mode
The VCR has two separate audio playback
systems, the high quality VHS Hi-Fi system and
standard NORMAL mono system. The same audio
is generally recorded on both systems. The VHS
Hi-Fi system plays on separate (left and right)
channels, and the NORMAL system plays
monaural sound. The normal track is always
played so the tape can be played on a VCR that
does not have VHS Hi-Fi.
Select Hi-Fi or NORMAL with
or
.
Broadcast type Multichannel Television Sound (MTS) carries
stereo and Second Audio Program (SAP) bilingual
signals. Set this setting to the value you want
when both MTS stereo and SAP signals are
received. When only one of the MTS signal is
received, the VCR automatically selects the
corresponding receiving mode (Stereo or SAP)
regardless of the selected value. For normal
operation, the setting should be STEREO. The VCR
then records a stereo program when available, and
records a mono program if the program is not in
stereo.
For weak stereo or SAP broadcasts, changing the
setting to MONO may give a clearer sound.
Select STEREO, SAP, or MONO with
or
.
Audio output
Used during playback (when AUDIO MODE
(HI-FI/NORMAL) is set to HI-FI) for selecting the
audio output signals from the AUDIO OUT jacks (L
ch and R ch), and RF.OUT.
This display setting should normally be left in the
STEREO position, so that when a stereo tape is
played, the stereo sound is heard through the left
and right channels. If a mono tape is played and
the audio output is set to STEREO, the same mono
sound is heard from both left and right channels.
Select STEREO, LEFT, or RIGHT with
or
.
Note
Maker sure that the VCR is connected to an antenna or cable
television.
