40
NS-FDRE44W1/NS-FDRE44W1-C
www.insigniaproducts.com
Maintaining your dryer
For information about cleaning your lint filters, see “Cleaning the lint filters” on
page 32.
Cleaning the heat exchanger
• Clean the heat exchanger approximately once every two months.
• Remove the lint from the heat exchanger using a vacuum cleaner with a
dusting brush attached.
• Do not apply any pressure or the heat exchanger may be damaged. The
dryer will not dry if the cooling fins are damaged or bent.
• Follow the instructions on the label on the heat exchanger cover.
The heat exchanger is behind the base filter. See Cleaning the base filter on
page 33.
Cleaning the exterior
• Clean with a soft, damp cloth. Do not use abrasive substances.
• Protect the surface from sharp objects.
• Do not place any heavy or sharp objects or a detergent box on the dryer. Keep
them in a separate storage area. These items may scratch or damage the top
cover of the dryer.
• Because the entire dryer has a high-gloss finish, the surface can be scratched
or damaged. Avoid scratching or damaging the surface when using the dryer.
Cleaning the drum
• Clean with a damp cloth dampened with a mild, non-abrasive cleaner suitable
for stainless steel and anodized surfaces.
• Remove the cleaner residue and dry with a clean cloth.
WARNING:
Do not touch the heat exchanger with your hand. This may cause
an injury.
