Insignia NS-19LCD, User Manual

Page: 6 / 72

6
Insignia NS-19LCD 19” LCD TV
www.insignia-products.com
Remote control
Using the remote control
To use the remote control:
• Point the remote control towards the remote
sensor on the front of your TV.
The following illustration shows the remote
control range.
11 AV IN left audio Plug the left audio connector
on a standard audio/video
cable into this jack, such as a
VCR.
12 AV IN video Plug the video connector on a
standard audio/video cable
into this jack, such as a VCR.
13 S-VIDEO Plug an S-Video device into
this jack. An S-Video cable
does not carry sound. You
need to plug the right and left
audio connectors on a
standard audio/video cable
into the AV IN right and left
jacks to provide sound.
14 LINE IN Plug a computer audio cable
into this jack.
15 D-Sub Plug a computer video cable
into this jack.
Button Description
1 Display Press to display information,
such as channel number, audio
mode, or signal source.
2
Power
Press to turn your TV on or
off.
3 Numbers Press to change channels. In
the on-screen display (OSD),
press to enter your password.
4 MENU Press to open and close the
OSD.
5 CH+ and CH– Press to change channels.
When the OSD is open, press
to select menu options.
Jack Description
2
3
4
5
6
7
14
1 3
12
11
10
9
8 1
ZOOM
6 MUTE Press to mute the sound.
Press again to restore the
sound.
7 PICTURE Press to select the picture
mode.
8 MTS/SAP Press to select the stereo
mode.
9 INPUT Press to select the signal
source.
10
Return
Press to go to the previously
viewed channel.
11 VOL+ and VOL– Press to increase or decrease
the volume.
When the OSD is open, press
to adjust an option.
12 ENTER Press to confirm selections.
13 SLEEP Press to set the sleep timer.
14 ZOOM Press to select the aspect
ratio.
Note
The location of the remote sensor may vary.
Notes
• Do not expose the remote control to shock or liquids.
• Do not use the remote control in an area with high humidity.
• Do not place the remote control in direct sunlight.
• Do not place objects, such as furniture, between the remote
control and the remote sensor.
• The remote control may not work if direct sunlight or bright
light shines on the remote sensor. Either move your TV or
change the angle at which you use the remote control.
Button Description
16.4 ft.
(5 M)